Introduction: 

BEVS1707 PIG is using destructive method to measure coating thickness, containing single and multiple coats, applied on all of substrates, e.g.:aluminum, iron, plastic, wood, concrete, glass etc. 

Using Principle:

A cut is made on the test surface with a V-shaped tool.The coating thickness can be measured with the built-in microscope underthe LED light.

Standard:

ASTM D4138, DIN 50986, ISO 2808

Technical Specification:

Measurement Principle:

Operating Steps:

Step	Illustration	Description
1		Prepare the inspecting area
2		Draw a line with the marker pen on the surface
3		Cut the coating vertically and make sure it is lacerated
4		Read the graduation-scale with the microscope to attain thickness

Order Information:

BEVS 1707 Paint Inspection Gauge, including 3 x cutters (No. 1, 2 and 3 each), 1 x battery, 1 x marker pen and 1 x carrying case

Accessories:

BEVS 1707/P/010             Cutter No.1 
BEVS 1707/P/020             Cutter No.2 
BEVS 1707/P/030             Cutter No.3

Paint Inspection Gauge.pdf

BEVS 1707 Paint Inspection Gauge User Manual.pdf

Not available.

To be updated..