Gitterschnittprüfer

HOME

PRODUCT

INTELLIGENT SYSTEM

ADVANCED TECHNOLOGY

DESIGN CENTER

NEWS

ABOUT US

Request Quotation

Gitterschnittprüfer

Introduction: BEVS 2202 Cross Hatch Cutter is designed and manufactured according to ISO 2409-1992, GB/T9286-98, B

Introduction:

BEVS 2202 Cross Hatch Cutter is designed and manufactured according to ISO 2409-1992, GB/T9286-98, BS 3900 E6 and ASTM D3359 standards.

Technical Specification:

Order Information:

Standard Kit	Contain
BEVS 2202/1C	Cross Hatch Cutter + Carry Case + Hexagonal Screwdriver + Brush + Magnifier + Tape
BEVS 2202/2C
BEVS 2202/3C
BEVS 2202/4C
BEVS 2202/6C
Simple Kit	Contain
BEVS 2202/1S	Cross Hatch Cutter + Paper Box + Hexagonal Screwdriver
BEVS 2202/2S
BEVS 2202/3S
BEVS 2202/4S
BEVS 2202/6S

Evaluation Criteria of Coating Adhesion Test:

Description	Performance	Class(ASTM)	Class(ISO)
The edges of the cuts are completely smooth; none of the squares of the lattice is detached		5B	0
Detachment of small flakes of the coating at the intersections of cuts. A cross-cut area not significantly greater than 5% is affected		4B	1
The coating has flaked along the edges and/or at the intersections of the cuts. A cut area significantly greater than 5%, but not significantly greater than 15% is affected		3B	2
The coating has flaked along the edges of the cuts partly or wholly in large ribbons, and or it has flaked partly or wholly on different parts of the squares. A cross cut area significant greater than 35% is affected		2B	3
The coating has flaked along the edges of the cuts in large ribbons and/or same square have detached parity or wholly. A cross-cut area significantly greater than 35%, but not significantly greater than 60% is affected		1B	4
Any degree of flaking that cannot even be classified		0B	5