Introduction:
BEVS1301 Pencil Tester complies with the requirements of ASTM D3363 and ISO 15184 standard, through leaving a superficial trace on the dry coating film with a certain pencil hardness, the surface will be variably damaged by the hardest pencil to evaluate pass/fail or hardness. Recommend to apply on the smooth film surface.Use variety of different hardness pencils,the angle between pencil and the coated surface is 45°, scratch on the coated surface under a certain of force, the scratch resistance hardness of the coating is the pencil hardness which just scratched the coating.
Technical Specification:
◆Pressure of pencil tip: 1000/750/500g
◆The angle between pencil and film surface is 45°
◆Three points are touched on the tested surface (roller, pencil tip)
◆Scratch Speed: 1 mm/sec
Hardness Class:
◆Hardness Increase
◆Mitsubishi pencils are available upon request
Standard:
ASTM D3363, ISO 15184
Order Information:
BEVS 1301/500 Pencil Hardness Tester (500g) |
BEVS 1301/750 Pencil Hardness Tester (750g) |
BEVS 1301/1000 Pencil Hardness Tester (1000g) |
Introduction:The BEVS 1828 Automatic Panel Sprayer is a fast, intelligent and automatic device for spraying panel
Introduction:In order to on-site make film to obtain good coatings and instantly detect the performance of coatin
Introduction:The BEVS 1806F Adjustable Applicator is designed according to ASTM D823E. It consists of two precise
Introduction:BEVS 1131 Intelligent Rotothinner is used to measure the viscosity of most non-Newtonian and Newtoni
Introduction:BEVS 1132 Intelligent Cone and Plate Viscometer is a highly accurate instrument that research the rh
Introduction:BEVS 1133 is a new manual type Intelligent Krebs Viscometer that adopting the new touchscreen techno
Introduction:The BEVS 1818 Mini Automatic Film Applicator is an ideal machine for preparing a wide variety of pro
Introduction:This machine is used to test the abrasion, scrub and washability performance for many kinds of mate
Introduction:BEVS Automatic Cupping Tester is an advance technology to efficiently assess the elasticity and cupp
Introduction:BEVS 1306 Intelligent Pendulum Hardness Tester consists of measuring the damping time of a pendulum
Introduction:BEVS 2201 Automatic Pull Off Adhesion Tester adopts the full touch screen technology, It enables to
Introduction:This instrument enables to test the scratch resistance performance, adhesion performance, hardness a