Intelligent Multifunctional Salt Spray Tester

HOME

PRODUCT

INTELLIGENT SYSTEM

ADVANCED TECHNOLOGY

DESIGN CENTER

NEWS

ABOUT US

Contact Info
Local Agent
- Asia
- Europe
- America
- Oceania
- Africa
After Sales Service

Request Quotation

Intelligent Multifunctional Salt Spray Tester

Introduction
Standards
Download

Introduction

BEVS Salt Spray Tester is used to simulate marine or high temperature and high humidity environment for corrosion test of materials or products. Specimens will be exposed to repeat the cycle of various conditions, including salt spray, humidity, dry-off, high temperature and high humidity, and constant humiture. The cycle can be programmed to include one or more than one test conditions. BEVS Salt Spray Tester can carry out continuous salt sprat, Prohesion and most cyclic automotive corrosion tests. With the advanced software system, users can select the pre-programmed test method, view the real-time testing parameters and historical curves and ouput the data.

Function

Fog Function

When the Fog Function is performed, the salt solution in the external tank is pumped to the nozzle. Compressed air is humidified and heated by the saturator on its way to the nozzle. The corrosion solution is atomized by the salt spray nozzle and sprayed evenly. Chamber heaters maintain the programmed chamber temperature.

Drying Function

During the Drying Function, air is heated by the air heater and then conveyed to the chamber through the blower. The temperature inside the box is controlled by the chamber heater and the air heater together.

Moisture Function

During the moisture function, the blower dries air and the humidifier moistures air to control the humidity inside the chamber. PID controller is used to ensure that the humidity of the box is stable within the standard range through intelligent adjustment. The air heater maintains the chamber within the set temperature.

Features

Adjustable spray nozzle ensures even fog.
A big touch screen enables clear images and easy operation.
Real-time display of testing progress, parameters and curves.
Intelligent software system allows presetting 20 testing methods.
Record the testing data of specimens in different batches and groups.
Reinforced fiberglass construction offers better anti-corrosion performance.

Specifications

Model	BEVS3310	BEVS3320	BEVS3330
Name	Intelligent Multifunctional Salt Spray Tester	Salt Spray Tester	Complex Salt Spray Tester
Function	Drying + Moisture + Fog	Fog	Drying + Fog
Power	7.5KW	3.5KW	5KW
Power supply	Three phase five wire 380V, 50-60Hz	Three phase five wire 380V, 50-60Hz	Three phase five wire 380V, 50-60Hz
Power supply	Single phase maximum current 20A	Single phase maximum current 8A	Single phase maximum current 10A
Air supply	Pressure 0.7Mpa	Pressure 0.7Mpa	Pressure 0.7Mpa
Air supply	Flow rate not less than 45L per minute	Flow rate not less than 25L per minute	Flow rate not less than 25L per minute
Capacity	800L	800L	800L
Humidity range	20%-100%	—	—
Humidity range	Accuracy:±5%	—	—
External salt water tank volume	120L	120L	120L
Heating method	Titanium tube heater
Temp. range of the test chamber	Ambient-65℃±2°C	Ambient-50℃±2°C	Ambient-65℃±2°C
Filling method of deionized water	Automatic filling (no manual mode)
Specimen capacity	192 specimens，75×150mm, 12 brackets×16 slots, Max load: 80 kg ,
Specimen capacity	12 hanging rods, 75×150mm, Max load: 40 kg
Inner dimensions	1100×800×730mm
Outer dimensions	2050×950×1500mm (Chamber)
Outer dimensions	300×400×1200mm (external salt water tank)

Previous: No information found

Next: No information found

Other Products